SEWLORE / FREE GEOMETRY LESSON

Seam Corner Offset Lab

Seam Corner Offset Lab

The allowance stays the same. The corner intersection does not. Explore why an acute inside corner sends two offset seam edges farther along the angle bisector.

01 / Explore the corner

Seam Corner Offset Lab | SewloreOriginal V corner edges in teal, inward offset seam edges in dashed rust, bisector distance d from O to M, and perpendicular allowance from M to the right original ray.OMd = 14.14 mma = 10.00 mmθ = 90°Cut edgesSeam edges
Resultsθ = 90°a = 10.00 mmd = 14.14 mmd/a = 1.41Angle 90 degrees, allowance 10.00 millimeters, bisector distance d 14.14 millimeters, ratio d over a 1.41.
Formula: d = a / sin(θ/2) where θ/2 = angle × π / 360.
O: original corner. M: offset intersection. O–M: angle bisector. Scale adjusts to fit.
Legend: teal = original cut/reference edges and bisector, rust dashed = inward offset seam edges and perpendicular allowance.
Math checks: 90/10 → d 14.14, d/a 1.41; 60/10 → d 20.00, d/a 2.00; 30/10 → d 38.64, d/a 3.86; zero case 90/0 → d 0.00, d/a undefined.

02 / Two distances, one corner

The input angle θ is the smaller interior opening between the two original straight edges of the V, measured at O. It is not the turn angle, its supplement, or a machine setting. The angle bisector divides that opening into two equal angles of θ/2.

An allowance a is measured perpendicular to each original edge. Moving both edges inward by that distance produces two parallel offset lines that meet at M. The miter distance d runs from O to M along the bisector—not across the allowance. In the resulting right triangle, sin(θ/2) = a/d, so d = a / sin(θ/2).

As the opening becomes more acute, sin(θ/2) becomes smaller. The same perpendicular allowance therefore places M farther from O. This is an intersection of ideal lines, not an increase in the allowance itself.

03 / Three worked examples

Right angle · 90° / 10 mm. Half the angle is 45°. d = 10 / sin(45°) = 14.14 mm; d/a = 1.41. The bisector distance is already greater than the 10 mm perpendicular allowance.

Acute angle · 60° / 10 mm. Half the angle is 30°. d = 10 / sin(30°) = 20.00 mm; d/a = 2.00. The intersection sits twice the allowance away from O along the bisector.

Sharper angle · 30° / 10 mm. Half the angle is 15°. d = 10 / sin(15°) = 38.64 mm; d/a = 3.86. A narrower opening produces a much longer miter distance without changing a.

Zero allowance · At a = 0 mm, the offset lines coincide with the original edges and M coincides with O. The distance d is 0 mm. The ratio d/a is undefined because 0/0 is not a defined division. These examples and the formula remain readable without operating the lab.

04 / Name the line. Keep the endpoints.

Use explicit cut line, seam line, and fold line labels in a measurement record. Here, the original cut/reference edges define O; the inward offset seam edges define M. A fold line is a separate named reference if your drawing includes one—it is not automatically either of these edges, and none is modelled in this lab.

Record the angle, units, perpendicular allowance, and the exact measurement path and endpoints. For d, always compare the straight bisector path from O to M. For a, always compare a perpendicular segment between an original edge and its offset. Do not switch from cut line to seam line, choose new endpoints, or compare an edge-following path with a straight-line distance and call the difference an allowance change. The diagram rescales to fit, so compare numeric values rather than screen lengths.

For broader recording context, read the Sewlore Fabric Measurement Methods Guide.

05 / What this model does not tell you

This resource models ideal planar, straight-line geometry only. It does not account for fabric stretch, thickness, drape, grain, deformation, or other material behavior. It provides no sewing machine allowances and no practical clipping, trimming, or construction recommendation. The offset lines are ideal geometric references, not tested instructions for handling fabric.

All examples are hypothetical and AI-assisted. No physical fabric tests or independent expert review occurred. This is a free educational resource, not an experimental report.

Create a free website with Framer, the website builder loved by startups, designers and agencies.